-Washer fluid reservoir or external tank, MAP or MAF sensor, Single or Dual Nozzle
Not sure... Call for assistance (302) 838-2188
Alkycontrol Methanol Injection kit for the C7 Corvette platform. This is the best kit on the market for the C7. Plenty of reading and feedback at www.corvetteforum.com. Features Custom made braided hoses, fittings, wiring, instructions etc.
Modified Pump 250+ PSI, protective cover to keep water from intruding into motor, custom built
Progressive controller preset for the C7 based platform.
Custom Relay to transfer power from Fuse box to controller eliminating any interference from the system and vehicle electronics.
GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller, or MAF converter option for the Z06/PD blower applications.
3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal.
This is a complete kit. Down to the custom tank fitting and grommet for the reservoir, cap for reservoir, plug for ww pump, stainless steel hardware to mount pump, bracket to mounty pump, vehicle specific instructions, pre-taped pump fittings, 90 micron in-line filter, M15 15 GPH Nozzle with high pressure check valve, all wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit. Not to be confused with a generic kit.